Permabond

Permabond A1024 is designed specifically for bulletsealing applications where the adhesive can be post applied to wick down between bullet and cartridge casing.

Permabond A1062 is a single component anaerobic adhesive.

Permabond 101 is a low viscosity product useful in wicking or penetrating applications or bonding closely fitting parts. It is fast setting and suitable for use on plastics, rubber and metals.

Permabond 102 adhesive is a low viscosity general purpose cyanoacrylate adhesive suitable for bonding close-fitting components. It is fast setting and suitable for use on plastics, rubber, and metals.

Permabond 102 is a low viscosity general purpose plastic bonding product useful in applications or bonding closely fitting parts.

Permabond 2011 cyanoacrylate is a one-component, fast curing, surface insensitive, thixotropic adhesive gel used for bonding vertical and porous surfaces, metals, elastomers, plastics, wood and ceramics.

Permabond QFS 16 Cyanoacrylate Activator is used to accelerate the curing of cyanoacrylate adhesives, wire tacking, and sensitive plastic surfaces. 

Permabond TA4246 is a 2-part, no-mix, room temperature curing structural adhesive. 

Permabond TA4610 is a two component, 1:1 toughened acrylic adhesive developed to bond low-surface energy plastics with no primer or surface treatment.

Permabond ET500 is a two component, fast curing epoxy adhesive that is used to bond a variety of substrates such as metal, plastics, wood, composites, and ceramics. 

Permabond ET515 is a 1:1 mixable epoxy adhesive. ET515 is a semi-flexible toughened adhesive with good adhesion to a variety of substrates such as wood, metal, ceramics and some plastics and composites.

Permabond ET5145 is a 1:1 mixable epoxy adhesive.

Permabond ET5147 is a 2:1 mixable epoxy adhesive. It has excellent resistance to impact and vibration.

Permabond ES550 is a single-part epoxy paste which is slump-resistant (does not flow) during cure.

Permabond ES560 is a single-part epoxy adhesive which flows when heated.

Permabond ES578 is a single-part heat cured epoxy adhesive with excellent adhesion to metal surfaces, ceramics as well as composite materials.

Permabond UV605 is a very low viscosity, high strength adhesive which cures on exposure to UV light.

Permabond UV610 is a single part, fast setting, UV curable adhesive designed specifically for bonding glass and metal. 

Permabond UV620 is a single part, fast curing, UV curable adhesive.

Permabond UV610 is a single part, fast setting, UV curable adhesive designed specifically for bonding glass and metal. 

Permabond UV630 is a single part, fast setting, and UV curable adhesive designed specifically for bonding plastics. This material has excellent adhesion to a variety of plastics including polycarbonate.